Compression came back as 135 on the front 2 and 130 on the back 2
Seems to be a good reading apparently
At least that should mean the misfire isn't anything too serious
Adam
Type: Posts; User: s13adam
Compression came back as 135 on the front 2 and 130 on the back 2
Seems to be a good reading apparently
At least that should mean the misfire isn't anything too serious
Adam
Car IS 100% standard
I blame my phone on this one!
Car isn't 100% standard
And you're right! It says super unleaded 95! I always saw super and assumed it meant 97 upwards
I still think it runs better on the higher Ron but now I won't worry...
Checked last year mate, had a cambelt prior to me buying it so had it checked as a matte of course
I only mentioned the super unleaded as under the fuel flap there is a sticker saying super unleaded only but the manual says anything over 95 Ron so that's what's thrown me
I think perhaps...
Cheers for the feedback guys
There nothing immediately wrong with it but it's a problem that's annoyed me for a while now and I'm sure it wasn't present when I got the car
Probably best I leave...
I hoping for a bit of advice as I'm starting to get stuck with my s13
The idle is a bit weird and I've read so much on here about worn valves, I've cleaned everything I can think of, replaced...
Just to bump this very quickly
I brimmed the car with super unleaded and changed the fuel filter and the car ran perfectly, no popping and it was less jerky when lifting off the throttle
Now...
If you pm me your mobile number I'll send some pics over what's app tomorrow, I can't make it out from your pictures
My engine is standard so I hope that's what you're after?
No dump valve
Cheers for the replies
The inter cooler doesn't look brilliant, I would have taken it off and had a look but most of the bolts looks like they will shear if I go near them with a socket
The...
Boost is standard as far as I'm aware, I've had a good look and can't see any bleed valve
When I got it the was a bleed valve on the actuator hose but I soon removed that
As I said it bangs,...
Why would it be hitting fuel cut when it's standard?
Timing is fine as it was checked by Gary at apt recently, plugs are brand new but I went for the cheap Ngk ones and not the platinum ones
...
Evening gentlemen
I've been using the 13 as a daily for the last few months and not being too familiar with them I'm not sure if mine is running ok
Basically I can drive normally and the car...
Found it in the end
There's a bracket on the corner of the air box
Cheers for your reply Jonny
Having removed the cone filter from my s13 I've put the standard airbix back on but the injector resistor is just flapping around
Does anyone have a picture of where it's meant to mount from...
They look awesome!
Are they 17's? How low is the car and did you run spacers?
Hi there
Does anyone have a picture of an s13 with Japan racing wheels on? I'm after a set of jr11 wheels to be precise but don't want to spend my money until I've seen a picture as with many...
I did wire a fuse in even though it was only temporary :)
As it happens I'd popped to wilco to get some bits to wire in a separate horn as I was bored with fairly finding and bumped into an s15 owner, he said he'd had to do the same sort of thing with a...
It's back to the standard wheel now
I've had the front off the wheel and it all looks to be connected and I have no idea how to use a multi meter
If anyone could shed some light on my issue it would be much appreciated
When I picked up my s13 i noticed the horn didn't work, at first I noticed it was unplugged so I plugged it back in and...
That roughly what I thought
Fitting is around 250 also so not all bad by all accounts
He said he was waiting to hearback from turbo dynamics but he emailed them on Monday so got to play the...
I'll fit the valve when it gets here and keeps eye out for smoke
When I blanked it off earlier it did get rid of most of it so fingers crossed
I won't be doing the fitting myself, got apt 5...
Well a quick bung up of the pipes seems to stop the smoking somewhat
When I took the breather off the top left hand side of the rocker it there was a nice little puddle of oil :(
Having done...