Hi
I want to try and build my own sub harness for VAG R8 coil conversion but can't seem to find any information of recommended wire gauge. Would AWG18 be enough for the signal wires and AWG 14 for...
Type: Posts; User: Zman
Hi
I want to try and build my own sub harness for VAG R8 coil conversion but can't seem to find any information of recommended wire gauge. Would AWG18 be enough for the signal wires and AWG 14 for...
My car has been standing for over 4 years and I am trying to revive it.
I can't seem to control the heater, it sits on full hot and it doesn't change to cold.
I have installed the JDM digital...
Hi!
Do you have any hoses to fit the R33 GTR callipers on an s14? I have R33 on both front and rear.
What colours are there to chose from and how much would the shipping cost to Sweden?
Feels a bit like I'm talking to myself. I have made some more research looking for that part in FAST from what I can tell there should be a "washer" but only on early z32 g boxes, apparently there is...
anyone? I tryed looking in the FSM. In the FSM it looks like there should be a big washer before the snapring. If this is true then I am missing that part?
Hi!
I am trying to put my z32 gearbox back together after having it apart.
I now have some parts left over. Somehow I managed to mix the parts from the z32 gearbox with the parts I had for the...
Hi
Can you suply a set of type NS pads,both front and back for Brembo R33 callipers?
How much would they cost shipped to Sweden?
Hi
I am looking for a prop shaft for a z32 gearbox conversion on an s14. I would prefer an aluminium one.
Do you do these?And if so at what price shipped to Sweden?
I am sorry if this is in the total wrong section.
But I am in Sweden and need a par of wings sent to me from Ireland. Could somebody recommend any carrier to chose?
Thank you
I think I fixed it.
I changed the wires to to the an7and an8 input and now it seems to work as it should. The values on the gauge are the same as the values on datalogit.
It seems that an1 and...
Thanks a lot! I wasn't able to find that!
What do you mean by common earth point?
The WBo2 is grounded to the chassi. Do I need to ground something else?
Thanks! But I've looked at those before and it dosn't really help. It made me a little confused though. I have been told that I need to connect the vems WBo2 to an1 and an2 and that should be it. In...
I'm looking at some of the logs I've made. In "mapwatch" an1raw and an2raw, is this correct?
In an1 almost everyting is filled with the digit 1, in an2 I have everything from 1 to 4.
Are these...
Hello!
I'm trying to logg the wideband values with the fc datalogit software but the logged values are not the same as what the WBo2 gauge shows.
I have set the vems to linear out (vout conf5)...
Took me almost 2 weeks or wiring to get it all working don't want to do it all again to retrofit the old one :D
Shouldn't it turn off the AC if I want it to heat the car? It seems it always keeps the ac on when on auto, if I don't turn it off. I can understand why the ac is usefull when you want the car to...
I've just installed a DCC unit in my european s14. It seems to work as it should but since I've never seen a DCC equiped s14 I have some questions.
If I press the auto button it automaticly turns...
My car is a european LHD. It's a 94 and it dosn't have NATS or any other security system installed.
Could that be the problem? Maybe all jap s14s had NATS?
I have a problem, when I turn the igniton on with the PFC installed.
The handcontroller freazes and a relay starts clicking like mad. I found a vid on youtube with someone having the exact same...
Yea I'm verry confused about the diagram found on this page. Can't really figure out from what side of the plug they are looking at it from.
I'm desperatly serching for a FSM of the z32 but all I...
I think soomething must be wrong. It shows about 3800mV on idle with the z32afm and about 400mV with stock afm. Could the AFM be broken?
I'm just guessing but is the rideheight meassured from the center of the wheel to the wheel arch?
Both the s14 and BMWs have a higher wheel arch on the front than on the back.
So the meassurement...
The car runs with the stock MAF and I can play with the fuel map makeing it run richer or leaner.
With the z32 AFM it stays at 10,2 AFR and runs really rich with loads of black smoke.
I chanced the...
I am actually trying to map the car.It hasn't been maped before and I'm trying to lern how the datalogit thing works.
The problem is that the car runs verry rich and nothing that I do to the fuel...
Care to tell me more about it?