Springs were chattering like crazy, and I ended up replacing them with H&R's.
But while installing the H&R's myself, I discovered the monkey in the shop that installed the APEX's had mixed up the...
Type: Posts; User: Vronsky
Springs were chattering like crazy, and I ended up replacing them with H&R's.
But while installing the H&R's myself, I discovered the monkey in the shop that installed the APEX's had mixed up the...
So where exactly lies the improvement in Whitelines product? It's just a 'bar' ...init?? Nothing mechanical that I can imagine can be improved. Better bushes?? What??
Or could it be that the...
Fella's,
What can I expect by replacing the standard ARB with Whiteline's??
Got KYB's (non-adustable) and H&R -/-30mm coils
THANKS
It's from 90, had a cat before the Goose. Lambda's in the exhaust outlet.
Update:
renewed that rad cap and topped the reservoir off to the maximum
no more disappearing coolant now, and level in reservoir stays steady at max marker now.
With weather temps as they are...
It's got Denso platinum plugs that cann't be adjusted, I understand.
If the Lamba is faulty, wouldn't I be having other probs aswell??
... I love it, actually :D ,but the bangs are sometimes so loud, it makes me wonder what's going to happen. I don't smell any fuel either, but do notice the occasional oil fume on idle. Read...
..forgot to mention: engine runs terrific !!
Pulls strong & smoothly along the whole rpm range, no misfire, starts fine, idles steady. No cooling probs. Fuel economy same as before, it seems.
Was...
It did bang & pop before, but since fiiting the Saab IC, it bangs & pops like crazy everytime I lift off throttle, between 3000-3500 rpm. Is this harmful?
I also notice oil smoke coming occasionaly...
I fitted a plain strip of aluminium across both tension rod brackets with holes in it for the bottom rubber mounts of the rad. For the Saab, I used two rubber door stoppers to support the IC that I...
Decided to give XP a try first, and here's how I solved the matter:
downloaded an image of a Windows 98SE bootdisk, and added a special driver to activate the USB-port on the notebook in DOS. I...
I still got the complete content of my previous Win95 PC stored on my current XP.
Is it somehow possible to use that content to install Win95 on the notebook??
Bugger...:wack:
Binned my Win95 disk some years ago when i got the XP machine.
Thanks. I think I'll first try to clone my current XP system to this Dell Cpi D266XT notebook with Norton Ghost 10.0
The config of the notebook should be just enough to handle a bare XP setup.
I...
I got this old Dell Cpi D266XT notebook pc that I'd like to use for downloading stuff with Limewire, Emule etc via my ADSL connection. This machine is too old for XP, but great for Win95. Afterall,...
If the tank has a leak, how can the level rise up again ??
Checked the radiator yesterday again when cooled off, and rad was full.
Opened the hood this morning, and coolant level in the reservoir was half way the markers again, and rad full. Remains a...
So when I checked the level this morning, and found the level way below the minimum marker (nearly empty), the 'missing' coolant in the reservoir must have been sucked back into the main cooling...
Thanks for the explanations, but do any of you have any idea how my empty reservoir filled itself again when driving ???
No, has been very hot here lately, but whether has changed to mild temps.
Since replacing the pump, the coolant level in the reservoir was always between half way and the maximum marker. This morning, however, I found the level far below the minimum marker. If this...
Waterpump has been changed recently, everything appeared fine again.
Checked the coolant level this morning before starting, and noticed that the level in the reservoir was WAY beneath the minimum....
Nope, its not coming from inside the box, nor from that bulb-thing at the front. It's coming from a spot inside the pipe approx 300mm before the end of the front section, about half way under the car.
It's definately not detting. When I hammer the pipe with my fist with the engine off, it also happens. When driving, the sound resonates at revs between 3-4000 rpm. Any loose bit from the turbo or...
Got me this Mongoose from Bren last year.
Since a couple of months, I'm noticing this funny sound coming from the front pipe-section just before the connection with the middle part. At certain revs,...