In faq the link is not available can someone give me the guide?
Enviado do meu E2333 através de Tapatalk
Type: Posts; User: ricardomendes
In faq the link is not available can someone give me the guide?
Enviado do meu E2333 através de Tapatalk
Need more items have you seen my PM i sent?
Enviado do meu Q8 através de Tapatalk
Is this available? Send you a PM regards
Enviado do meu Q8 através de Tapatalk
the dash sensor, usually
In the Dash?
my is the same only shows the error if i don´t start the car, when i start it goes away
i didn´t think in change the suspension type on my project. but if you want i have i few book´s that a can send to you just give me your email by PM.
what have you done to solve it? some times i get that error too
first i get the positions of the points with a chassis analyser that we have also in the MOT to see if the chassis have any damage. then i put the coordinates on the lotus software and get this...
hi there i use the lotus software shark to make the study of the geometry of the my s13 to design an adapter to correct the roll center and to get all the geometry to work correct again.
...
man the flow with t25 at 15psi is not the same to your t3 at 15psi, you are running lean for sure and the car cut. turn your boost down.
so who is using this COP VAG on ca18det? any pics of the kit? my coilpacks if they are the same from factory have at least 200.000 km, and i´m looking to change them and this is a good option because...
exhaust gaskets? cracked wastegate port?
In my ca18det is the same, with the pump priming the pressure is 2.5 and when it stop the fuel pressure goes to 0 right away. I think it should hold more time, I will try another one when I can.
i there i would like to know if anyone have any thing of OEM suspension geometry or knuckes on cad, solidworks, or any other software?
i will do a project for university, and i need the oem suff...
i don´t fitted the restrictor in mine because it as one built in, you need to check on your oil inlet in the turbo if it as one or not.
No 444cc are 444cc in 3bar fpr in ca18 the fpr is 2.5bar.
The 444cc in my ca18 Only with gt28r and 0.9bar pass the 100% of duty cycle after 5000rpm...
For 2871r at least 650cc.
i mounted mine where the oem ic was and mounted one with 13row with termostatic mocal, the termostat is open all time letting the oil go to the filter in normal way and to the cooler too, when it...
Today i put new oil in diff 75w90 and only 1.5L, and put 1 meter of hose in one of the oil cooler to vent to atmosphere, the result was more leaking but now from this new hose because no restriction,...
No One have Any clue?
Anyone?
I have an s14 diff on my s13 and after a year withit, it start to leak from the breather, is s14 with s13 backplate, diff cooler removed etc.
I open it, new gasket and give more pressure in the...
Igoman made that but the engine after 15.000km of rebuilding start to knock main and rods bearings, he was running very good oil, and stage 3 h-DEV with t28r. But we don't know what was the real...
in my case I don't want a topmount nani, the gt3071will fit bottom mount with aftermarket nani like xspower I think.
I would like around 300@wheels.
I made 300 engine hp with 0.9b using t28r...
...
when you guys say "GT3071r will have a hard time spooling before 4000rpm" will the turbo start to spool at 4000 or have 1 bar @4000?
the gt3071r with this part number 700382-3 or 700382-5003 have...