My current setup is
Tein rods
Japspeed ends (pillowball) they also help reduce bumpsteer.
Offset rack spacers
Geomaster tension rods
My own modded knuckles
+25mm lower arms, there also...
Type: Posts; User: HOODS
My current setup is
Tein rods
Japspeed ends (pillowball) they also help reduce bumpsteer.
Offset rack spacers
Geomaster tension rods
My own modded knuckles
+25mm lower arms, there also...
Do all of this before you get the welder out. If you want/need more then it's time for modded knuckles and rack moving
http://youtu.be/G5eN1xvGOu4
All the earths been put back on properly? Little one behind the engine?
Yes I'm running mishimoto rad cap. Spring is 1.3bar or 19lbs
Thanks for the reply man.
The thing is, I bought the new mishimoto rad because this issue was happening with the standard rad and cap.
I will try the standard rad cap but realy can't see it...
So the story goes,
While Drifting coolant seems to be getting forced through to the expansion tank to the point it's pouring out the over flow and emptying my rad, at which point my temps Jump up....
Faulty boost controller?
Internal wastegate jammed open slightly or the actuator could be sticky?
Boost controller plumbed in correctly?
What intercooler does it have?
Cheers john I'll add that to the list of things to check tommorrow :)
Awesome cheers man! I'll get an order in :)
Hey mark where will I get the plus for £7?
Just ordered a new fuel filter and I'll get the plugs out and get some new ones in at the weekend :)
Hi mark :)
I'm running just standard fpr, wiring to maf seems sound.
I think a new fuel filter is on the cards and I'll check the sock also. I'll need to also check the voltage to the pump.
...
No bov at all, got all the holes plugged up. Always ran it like this and it's been fine.
I have a sneaking suspicion that it could be the fuel filter.
At one stage through the reshell I almost ran...
Cheers guys! I still have the original elephant trunk so will fire that back on and see if anything changes but as you say it should be sound with the apex intake pipe.
the only thing that im not sure about on that side is im running the apex performance stainless intake pipe but its the one for the standard afm and im running the z32 airflow meter and i have a...
As the title states, my cars been off the road for 6 months while I was reshelling. Now she's all road legal and I've had a proper shot of the car and she's developed an unsteady/lumpy idle and when...
Yup sbody pillars ain't to strong.
3rd gear skids+mistake-cage=that
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/1272811_549721255098759_685391417_o.jpg?dl=1
As stated. Welded or 2 way diff. Decent coilovers, good bucket seat and harness. Rear camber and toe arms. Set up to mitto's alignment and your good to go.
I was the muppit that...
I know you'll need an r33 front subframe..
Which I have here for sale inc. steering rack, steering pump and reservoir.
All for £120+postage. :)
I'm still looking for a drivers side Zenki front wing if any one could help?
My shell is white but it's getting a new paint job before it goes on the road.
Got my old one lying there from my new shell if it's any good?
I've got 2 here ;) you find out about the wings yet?
The only wiring I touched was the ecu to engine loom then wired the engine loom section and fuse box power to the battery.
So your saying the ecu and ignition relays should have a permanent live...
No misfires as in pops or bangs. Just ticks over for a couple of seconds then begins to die as if it's getting starved of fuel. Which it will be as I can hear the fuel pump go off as soon as I turn...