Page 4 of 12 FirstFirst ... 23456 ... LastLast
Results 61 to 80 of 237

Thread: Library of s14/a power figures

  1. #61
    Guest
    Join Date
    Jun 2005
    Location
    clermont ferrand
    Posts
    43
    Rides
    0
    car

    1995, s14, 197000km

    mods

    air filter
    turboback 3"
    walbro fuel pump
    denso ik 24 plugs

    boost

    12 psi (0.8 bar)


    power

    @flywheel

    222cv whitout removable silencer
    180cv with silencer

    recorded at CFPP (clermont -ferrand,FRANCE)

  2. #62
    Guest Giblets's Avatar
    Join Date
    Aug 2003
    Location
    in the garage
    Posts
    1,154
    Rides
    0
    Car
    1996 S14 SR20DET
    77k miles

    Mods
    2.0mm HKS Head Gasket
    Wiseco 87mm Pistons
    Eagle H-Beam Rods
    Tomei Poncams
    Nismo 740cc Injectors
    Garrett GT3071WG 0.86
    Power FC D-Jetro

    Boost
    1.6 Bar

    Power
    427 bhp (flywheel)
    377 bhp (wheels)
    398 ft/lbs torque

    Mapped by APT
    Recorded at SCA

  3. #63
    Guest bazza.'s Avatar
    Join Date
    Aug 2004
    Location
    Germany
    Posts
    165
    Rides
    0
    CAR
    S14A Auto
    V reg 56,000

    MOD's
    1 Bar Boost
    Main decat
    SUS air Kit
    Cat back 2.5"
    Walbro 255
    Denso IK 22
    Earthing Kit
    Volt Kit

    POWER
    200 bhp (wheels)
    240 bhp (flywheel)
    192 ft/lbs Torque (wheels)

    Recorded at Janspeed Dec 2005

  4. #64
    Guest amnesia's Avatar
    Join Date
    Sep 2003
    Location
    Bournemouth
    Posts
    8,774
    Rides
    0
    Car
    1996 S14 SR20DET
    139k miles (13k on new engine)

    Mods
    1.8mm Trust Head Gasket
    Wiseco 87mm Pistons
    480cc Injectors
    Garrett GT28R
    Hybrid FMIC
    SAFC II & AVCR

    Boost
    1.2 Bar

    Power
    297 bhp (flywheel)
    251 bhp (wheels)
    239 ft/lbs torque

    Mapped / built by APT
    Recorded at Janspeed Dec '05

  5. #65
    Guest
    Join Date
    Sep 2005
    Location
    North London
    Posts
    857
    Rides
    0

    My Power Run

    I had my S14 dyno'd on the Red Dot portable dyno on 26/11/2005 at the Halfords Store in Hendon (North West London). They had an open day and dyno runs were £40. Me and Nismoid Drifter managed to get 2 for £40. Not bad eh.

    My mods were:
    Denso IK24's
    Apexi induction kit and heat shield box
    Apex downpipe, de-cat and cat back exhaust system
    Walbro 255 fuel pump
    Running 0.7 bar with Bren device
    Bailey dump valve
    HKS 2.0mm metal head gasket with ARP head bolts

    Power figures were
    HP @ flywheel: 240.6 BHP
    HP @ rear wheels: 196.1 BHP
    Torque @ rear wheels: 190.2 ft-lb

    I probably could of get more but i was only running 0.7 bar and the guy from Red Dot only revved it up to 5,800 RPM.

    Still my Apex FMIC arrived yesterday so when thats on, i'm gonna raise the boost up to a bar and see how that feels.

    Watch this space....

  6. #66
    Flamethrower
    Join Date
    Jul 2002
    Location
    Eaton Bray
    Posts
    18,653
    Rides
    0
    Car
    1998 S14a SR20DET
    82k Miles 3k since full rebuild

    Mods
    1.2mm Cometic metal HG
    550cc Nismo Injectors
    HKS 2540 turbo
    3" tubby back exhaust
    Hybrid FMIC
    Jez Stage 3 Chip
    Tubular manifold

    Boost
    24psi

    Power
    384 bhp (flywheel)
    328 bhp (wheels)
    361 ft/lbs torque (wheels)

    Engine rebuilt by myself
    Recorded at Janspeed Dec '05

    RR graph:-

  7. #67
    Guest
    Join Date
    Sep 2004
    Location
    Bristol
    Posts
    5,128
    Rides
    0
    1998 S14a
    48k

    Power Related Mods

    Engine - Trust 1.8mm head gasket, Tomei 256 poncams + RAS
    Denso iridium plugs ik24
    Walbro fuel pump
    Nismo 740cc fuel injectors
    OS Giken twin plate clutch
    Trust/greddy FMIC
    Apex oil cooler kit
    Dano 3" decat/front pipe, Apex single box cat back
    Apexi Power FC
    Apexi Power FC Commander
    Apexi AVCR
    Apex GT3071R 0.86 kit
    Apex Manifold
    Trust large capacity oil pan
    300ZX air flow meter

    Boost

    1.4bar made at 3800rpm in 4th gear

    RR Result

    355@wheels Janspeed RR = 415BHP at the Fly wheel

    1/4 mile

    Santa pod in dry-cold - 13.402@112.73
    Bruntingthorpe in wet-snow - 13.8@112mph
    Bruntingthorpe top speed - 164mph (rev limiter - limited)
    17*8, 225 Toyo S standard pressure 32psi no burn out

    Work + mapping carried out by Gary@APT
    Bits sourced by Bren@Apex

    Careful note to others that are going for this level, the gearbox dont like it I would recommend budgeting. I also recommend traction control.
    Last edited by ian_t; 23-01-2006 at 11:09.

  8. #68
    Guest
    Join Date
    Sep 2005
    Location
    Mansfield
    Posts
    807
    Rides
    0
    Car: s14a touring 1999 69k miles

    engine mods:
    apexi gt spec exhaust,
    walbro,
    ik24"s,
    bren device,
    dano decats
    stainless air filter,
    fidanza flywheel
    rps max street clutch
    apex tubular manifold,
    jez stage 1 chip
    hybrid intercooler,
    dv26 dump valve,
    running 15psi boost

    Power: 282.7bhp at engine
    232.6 at wheels
    390.6 nm torque

    carried out at Street racers in leicester.

  9. #69
    Guest
    Join Date
    Jul 2005
    Location
    Bristol
    Posts
    1,616
    Rides
    0
    Car:
    R plate '98
    S14a
    33,000 Miles

    Power Mods:
    Apexi air filter
    Bailey Evo D/V
    3" Apex Front Pipe
    3" Apex De-Cat
    Mongoose Cat Back
    IK 22's
    Walbro Fuel Pump
    Bren Device set @~14psi

    Power Output:
    237 BHP@Wheels
    239 lb/ft@Wheels

    Calculated 281 BHP@Fly Wheel

    SouthWest SXOC R/R Day 2005 @ Janspeed, Sailsbury.

  10. #70
    Guest
    Join Date
    Dec 2005
    Location
    gloucester
    Posts
    1,112
    Rides
    0
    Car:
    P plate '97
    S14a
    77,000 Miles

    Power Mods:
    1.8mm Head Gasket
    87mm Pistons (2045cc)
    S-AFC 2
    Tubular Manifold
    Replacement Air Filter With Modded Original Air Box
    3" Apex Front Pipe
    3" Apex De-Cat
    3" Apex Cat Back
    IK 22's
    Walbro Fuel Pump
    Bren Device set @ .9bar

    Power Output:
    272.1 BHP
    257.7 lb/ft

    this setup ran a 14.1 missfiring at 101mph
    Last edited by adey1984; 17-08-2006 at 14:32.

  11. #71
    Guest
    Join Date
    Jan 2004
    Location
    Oop Norf
    Posts
    2,969
    Rides
    0
    Car
    1995 s14 SR20DET
    110k miles

    Power-related mods
    # Free flow air filter
    # Free flow exhaust
    # Uprated fuel pump
    # Front mount intercooler
    # Nismo 555cc injectors

    Boost
    1 BAR (14.7psi)

    RR Results
    273.7bhp (flywheel figure) - 240 lb-ft
    230bhp (wheel figure)


    Recorded at Surrey Rolling Road
    Dyno Graph

  12. #72
    Guest
    Join Date
    May 2004
    Location
    Troon
    Posts
    2,183
    Rides
    0
    Car
    1996 s14 SR20DET
    107k miles (fitted with a later 55k engine)

    Power-related mods
    Apexi power Intake with custom cold air feed pipe
    Greddy VSPL FMIC
    Custom 3" straight through exhaust
    Apex split turbo elbow
    Nismo 555cc Injectors
    Walbro fuel pump
    Jez Horsham Stage 2 chip (S14a)
    NGK 8 plugs
    Mocal 19 row oil cooler
    Air con removed




    Boost
    1.2 BAR (17psi)

    RR Results
    315.5 BHP @ 6250 RPM (fly)
    305 lb/ft torque @ 4560 RPM


    Recorded at Star Performance (04/02/06)

  13. #73
    Guest Stuymac's Avatar
    Join Date
    May 2001
    Location
    Wirral - UK
    Posts
    9,621
    Rides
    0
    Car
    1998 s14a SR20DET
    80k miles (fitted with a less than 50k engine)

    Power-related mods

    3" Front pipe
    3" Decat
    Blitz Nur Spec R System
    Nismo Induction kit
    Walbro Fuel pump
    HUGE Bren prototype FMIC
    Denso Plugs
    Crank Case Breather system



    Boost
    0.9 BAR (14psi)

    RR Results
    296bhp @ Fly
    250bhp @ Wheels
    257 lb/ft Torque




    Recorded Peco Rolling Road Circa June 2005

  14. #74
    Guest Huwbert's Avatar
    Join Date
    Oct 2001
    Location
    Dursley
    Posts
    780
    Rides
    0
    Car
    1995 S14 200sx
    118,000 miles

    Power related mods
    Apexi filter
    Apex downpipe
    HKS Hiper Muffler
    HKS Fuel Pump
    ARC WMIC
    ND Adjustable actuator
    Colder NGK Iridium plugs

    Boost
    1 bar

    RR Result
    284.5 bhp (flywheel)
    219.5 bhp (wheels)

    Recorded at Interpro
    Last edited by Huwbert; 19-02-2006 at 15:23.

  15. #75
    Guest
    Join Date
    Aug 2005
    Location
    Germany
    Posts
    104
    Rides
    0
    Car:
    S14, 144k

    Power Related Mods:
    Apexi Super Suction Kit
    Z32 AFM
    Blitz LM Intercooler
    Sard Oil Catch Tank
    Walbro pump
    Sard fuel pressure regulator (at 3 bar in idle)
    Nismo 555 Injectors
    HKS S40i plugs
    Greddy E-Manage
    HKS Extension kit (small diameter)
    Full 3" exhaust (incl. 100 cell cat)

    Results:
    287 bhp (291 hp)
    285 lb-ft (387 Nm)
    at 13 psi boost (0,9 bar)

    Mapped at SLS in Hofgeismar, Germany
    (www.slstuning.de)

  16. #76
    Guest
    Join Date
    Nov 2004
    Location
    Rainham, Kentshire
    Posts
    7,893
    Rides
    0
    Car
    1995 S14 200sx
    115,000 miles

    Power related mods
    HKS filter
    2.5" Mongoose downpipe
    3" Apex exhaust and decat
    Walbro Fuel Pump
    S15 WMIC
    Colder NGK Iridium plugs

    Boost
    1 bar using Bren device

    RR Result
    277.6 bhp (flywheel)
    213.5 bhp (wheels)
    219.4 lbft (wheels)

    Recorded at SVA Imports

  17. #77
    Guest bates2k's Avatar
    Join Date
    Oct 2005
    Location
    Birmingham - cannock
    Posts
    512
    Rides
    0
    S14 touring M-reg 105,000

    spec:

    Greddy 2-stage boost controll @ 14psi
    full stainless system 5" exit
    de-cat and fanimold
    Type 2 intercooler from apex preformace
    hotpipe
    uprated clutch
    cheapo induction kit
    thats all to my knowlege

    RR results from SXOC rolling road day @ streetracers

    270.4 bhp @ fly
    210.9 bhp @ wheel
    343.3 Nm Torque

  18. #78
    Guest Christmas's Avatar
    Join Date
    Mar 2006
    Location
    Cheltenham
    Posts
    1,779
    Rides
    0
    [B]Car[/B

    1997 S14a 49k miles

    Mods

    Blitz Nur spec Exhaust
    Blitz Induction Kit
    HKS Actuator
    AP clutch
    De Cat
    Walbro fuel pump

    power

    260BHP at 12 PSI and 326 NM torque

    recorded at Street racers in Thurmaston on 26.02.06

  19. #79
    Guest
    Join Date
    May 2004
    Location
    Sunnyvale, Dublin.
    Posts
    687
    Rides
    0
    Car
    S14 1996
    Car 150,000 engine 5,000

    Power related mods

    Eagle h-beam rods
    Arais o/s pistons
    Hks step 2 cams
    Tomei adjustable pullys {ncvs in the bin }
    Greddy rocker arm stopper
    Ferrea double valve springs, seats and titanium retainers
    Trust 1.8mm head gasket
    Rps paddle clutch
    Lightend and balanced flywheel
    Greddy big wing oil pan
    Apex oil cooler kit
    Power FC
    K&n panel filter with box mod
    Apex front pipe, decat and cat back exhaust
    Apex fmic T1
    Koyo race rad
    Gt28rs
    Bren divice
    Hks ssq bov
    Sierra Cosworth ngk spark plugs

    Results
    304.4 bhp@fly
    253.1 @wheels
    290 lbft & 4808rpm
    @ 1 bar boost
    Last edited by sxmad; 01-04-2006 at 20:08.

  20. #80
    Guest
    Join Date
    Mar 2005
    Location
    Liverpool
    Posts
    539
    Rides
    0
    Car:
    1996 S14
    Car done 118k miles, Engine about 82k miles

    Mods:
    Air filter, thats it, standard basically

    Results:
    At 10 psi:
    Calculated 234.9bhp at 6489rpm @flywheel
    197.4bhp @wheels
    218.8 lbft torque at 4979rpm


    Recorded at System-R in Warrington

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •