Page 1 of 2 12 LastLast
Results 1 to 20 of 34

Thread: APT Mapping - Apexi Power FC

  1. #1
    Flamethrower Gary@APT's Avatar
    Join Date
    May 2001
    Location
    norwich,norfolk
    Posts
    3,659
    Rides
    0

    APT Mapping - Apexi Power FC

    APT are highly experienced and extremely competent in mapping a variety of different systems. We use the Motec PLM Wideband Lambda Reader for monitoring Fuelling. We have various other pieces of equipment, such as a Sun Exhaust Gas Analyser and 'Det Cans' which may be used also.

    For the Nissan 200SX we recommend and specialise in the Apexi products.

    For Low-to-Moderate powered cars, the Apexi S-AFC range is an excellent choice to give an adequate range of adjustment to the Fuelling system.

    For Moderate-to-Higher powered cars, the Apexi Power FC, which replaces the factory ECU, gives full and very versatile control over the Fuelling and Ignition conditions.

    The Mapping of this device is very specialised and should not be undertaken by anyone without the relevant experience or equipment required to monitor the engine.

    In our experience, many Engine Tuners only look at the Map in a very basic way. We have seen Maps where as little as 10% of the available adjustment points have been visited. We write the whole Map, including Warm-up, Idle, High Boost and everything inbetween. This will result in a car which is much nicer, safer and more economical to drive.

    The cost of Installation and Mapping of the Power FC starts at 400. This price will cover most scenario's, but we would ask for detailed information on each individual application before providing a firm quotation.

    We can also provide a Fitting/Mapping Service for the D'Jetro (MAP Based) version of the Power FC. This system replaces the cars Mass Airflow (or MAF) Sensor with a Manifold Absolute Pressure (or MAP) Sensor. Please enquire for details.

    We would normally require the car for at least 2 days to effectively complete this service.

    Thanks.

    Christian.
    Last edited by Gary@APT; 20-10-2005 at 13:13.
    ---------------------------------------------------
    Automotive Performance Tuning - Tel:01603 870990
    Email: sales@ap-tuning.co.uk



    FAST ROAD SPEC SR20'S from 3200 Details Here

    Power FC Mapping - **Current remap deal!**

  2. #2
    Guest
    Join Date
    Jun 2002
    Location
    Northampton
    Posts
    2,762
    Rides
    0
    Hi Christian,

    Any availability from 12/11/05 to 15/11/05? It would be for fitting a Power FC, 555 injectors, and mapping.

    Cheers

    Hingy

  3. #3
    Guest
    Join Date
    Aug 2003
    Location
    Uk
    Posts
    9,274
    Rides
    0
    Out of curiousity, why is using a MAP sensor better than an AFM?

  4. #4
    Guest
    Join Date
    Jun 2002
    Location
    Northampton
    Posts
    2,762
    Rides
    0
    You lose the airflow restriction and voltage limit of the MAF. Also, you don't get the overfuelling when lifting off the throttle as the air doesn't get measured twice.

  5. #5
    Guest
    Join Date
    Aug 2003
    Location
    Uk
    Posts
    9,274
    Rides
    0
    I thought overfuelling on lift off was more to do with BOV's?

  6. #6
    Flamethrower Gary@APT's Avatar
    Join Date
    May 2001
    Location
    norwich,norfolk
    Posts
    3,659
    Rides
    0
    There are indeed some issues with AFM's and some Turbo combinations that are eliminated when using a MAP based system and, Yes, BOV's can also cause issue's.

    In my opinion, in an ideal world, every 200SX would run a D'Jetro Power FC, but in reality for 350-400bhp, the MAF based Power FC system is more than adequate.

    Not sure if Gary shares this opinion!!

    Christian.
    ---------------------------------------------------
    Automotive Performance Tuning - Tel:01603 870990
    Email: sales@ap-tuning.co.uk



    FAST ROAD SPEC SR20'S from 3200 Details Here

    Power FC Mapping - **Current remap deal!**

  7. #7
    Guest
    Join Date
    Jun 2002
    Location
    Northampton
    Posts
    2,762
    Rides
    0
    Hi Gary, Christian and Chris

    Thanks for the excellent work on my car. It is now much smoother and feels great to drive.

    I am very happy with the power figure.


    Cheers

    Hingy




    Last edited by Maverick; 16-11-2005 at 13:58. Reason: To add image of graph.

  8. #8
    Flamethrower Gary@APT's Avatar
    Join Date
    May 2001
    Location
    norwich,norfolk
    Posts
    3,659
    Rides
    0
    Glad you are pleased. Great power figure for the spec too.

    Now go and enjoy it!!!

    Thanks.

    Christian.
    ---------------------------------------------------
    Automotive Performance Tuning - Tel:01603 870990
    Email: sales@ap-tuning.co.uk



    FAST ROAD SPEC SR20'S from 3200 Details Here

    Power FC Mapping - **Current remap deal!**

  9. #9
    S13 + 2bar = 475@wheels bren's Avatar
    Join Date
    Jul 2001
    Location
    Bradford
    Posts
    68,932
    Rides
    0
    Thats with a standard turbo? Nice smooth power curve

  10. #10
    I <3 BBS LM Actual_Ben_Taylor's Avatar
    Join Date
    May 2001
    Location
    South East
    Posts
    23,185
    Rides
    0
    Quote Originally Posted by bren
    Thats with a standard turbo? Nice smooth power curve
    GT28RS

    Very impressive for only 1.1bar, loads of torque!

  11. #11
    Guest
    Join Date
    Jun 2002
    Location
    Northampton
    Posts
    2,762
    Rides
    0
    Quote Originally Posted by BenTaylor200
    GT28RS

    Very impressive for only 1.1bar, loads of torque!
    Yep, GT28RS.

    I am definitely impressed with the torque.

  12. #12
    Guest alexjj's Avatar
    Join Date
    Mar 2003
    Location
    I have my towel, Im prepared
    Posts
    7,283
    Rides
    0
    Righto, will need to book in lads - got stuff to fit.. End of July/beginning August please. Do you want to know what exactly to be done?

  13. #13
    Flamethrower Gary@APT's Avatar
    Join Date
    May 2001
    Location
    norwich,norfolk
    Posts
    3,659
    Rides
    0
    alexjj - Just drop us a PM/Email with exactly what you want doing and favoured dates and we will go from there!

    Thanks.

    Christian.
    ---------------------------------------------------
    Automotive Performance Tuning - Tel:01603 870990
    Email: sales@ap-tuning.co.uk



    FAST ROAD SPEC SR20'S from 3200 Details Here

    Power FC Mapping - **Current remap deal!**

  14. #14
    Guest testpilot's Avatar
    Join Date
    Oct 2003
    Location
    Aberdeen, Scotland
    Posts
    9,088
    Rides
    0
    You have PM

  15. #15
    Guest nismo's Avatar
    Join Date
    Mar 2002
    Location
    East Anglia
    Posts
    1,088
    Rides
    0
    Just a quick question, have you mapped a 200sx on E-85 bioethanol, I want too run around the 350 - 400 RWHP mark.

  16. #16
    Flamethrower Gary@APT's Avatar
    Join Date
    May 2001
    Location
    norwich,norfolk
    Posts
    3,659
    Rides
    0
    no mate

    id say mainly because of its short supply, a few have asked about it
    ---------------------------------------------------
    Automotive Performance Tuning - Tel:01603 870990
    Email: sales@ap-tuning.co.uk



    FAST ROAD SPEC SR20'S from 3200 Details Here

    Power FC Mapping - **Current remap deal!**

  17. #17
    Member BLAKTOOTH's Avatar
    Join Date
    Jul 2007
    Location
    Benfleet, Essex
    Posts
    4,630
    Rides
    0

    Thumbs up Happy customer

    Just wanted to say thankyou to the guys at APT who Installed and mapped my Power FC recently. The car made 360bhp on the dyno and I'm really pleased with the results. The car feels like a complete animal on the road and runs like a dream. They were keen to answer my questions and there knowledge on SR20's seems to be great. Also it's the first time I have taken my car to a garage and it's been finished on time.
    TRUST/GREDDY TD06 20G HYBRID WITH TURBOSMART RACEPORT BOV AND HYPER-GATE 45, 260 PRO CAMS, BC VALVE SPINGS, COMETIC HG, NISMO 740CC INJECTORS, APEXI D JETRO, BLK AVCR, APEXI N1 ExTi, AEM INDUCTION, APEX RAD, CUSTOM HMIC, BC RM COILOVERS, STRUT BRACES, FULL ROSE JOINTED HARDRACE ALIGNMENT KIT, FULLY POLY BUSHED WITH POWERFLEX BLACK, WHITELINE ARB'S, VIBRA-TECHNICS ENGINE & TRANNY MOUNTS, SOLID REAR SUBFRAME BUSHES, OS GIKEN 1.5 WAY 3.9 ON POLY BUSHES, RPS 6 PUK PADDLE, DW FLY, GTR GOLD BREMBO'S WITH PF PADS, XXR 530 ALLOYS 18X9.75 ET20, BOMEX FR BUMPER & CUSTOM SPLITTER, SEIBON CARBON BONNET, BOMEX SKIRTS, JDM REAR & SPATS, SRB +20MM WINGS + FLARES & +50MM REARS, BGW ON CUSTOM LEGS AND MOUNTS TO RR QTR, FABRICAGE 6 POINT...
    MAPPED BY MARTIN @ MB AUTOMOTIVE
    Quote Originally Posted by Si View Post
    Also,
    Damping = controlling oscillation.
    Dampening = pissing your pants.

    THE BLAK BEASTY PROJEKT

  18. #18
    Guest
    Join Date
    Feb 2002
    Location
    Norwich
    Posts
    511
    Rides
    0
    Quote Originally Posted by BLAKTOOTH View Post
    Just wanted to say thankyou to the guys at APT who Installed and mapped my Power FC recently. The car made 360bhp on the dyno and I'm really pleased with the results. The car feels like a complete animal on the road and runs like a dream. They were keen to answer my questions and there knowledge on SR20's seems to be great. Also it's the first time I have taken my car to a garage and it's been finished on time.
    Glad you're pleased!!

  19. #19
    Guest
    Join Date
    Aug 2003
    Location
    Uk
    Posts
    9,274
    Rides
    0
    I've just got an SR20 PFC that i plan on fitting to my CA18. I think it's the early S14 SR20 PFC. Couple of questions about mapping quotes:

    How much to fit (rewire) the ECU and then map it?
    How much to just map it, presuming I give you the car with it already rewired and running ok; with copied AP engineering tweaks?

    Rough spec:
    CA18DET
    720CC Injectors
    GT2871R 0.64AR @ 1.6 decreasing to 1.5bar by the redline.

    Cheers.

  20. #20
    Guest ricky3510's Avatar
    Join Date
    Aug 2009
    Location
    Essex Init Blud
    Posts
    2,665
    Rides
    0
    How much would it cost to map my SR20det with GT2871r 0.64, Power FC D-Jetro, not sure on injectors yet but will be bigger then 550 as im aiming for 350bhp.

    Cheers.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •