http://www.growly.com.au/products.html
anybody running a CAS holder on their ca18?
I modified the factory cover in the past so it only utilized 1 dowel pin and I ruined 2 camshafts and 2 CAS over a 1 year period. Drove me near up the wall diagnosing the problem as well.
Yes the growly piece is much thicker, but it still only centers with 1 dowel pin and that worries me greatly. It was actually a tomei CAM that I ruined the splines in but was able to weld a bolt to the worn nub, rip it out with a slide hammer and salvage an OEM cam for the fresh splines