Pictures of the wheel, please!
Pictures of the wheel, please!
I followed this tutorial
http://importnut.net/steeringswap.htm
And this is my wiring (1st attempt)
NOTE:
The horn is the RED wire not the yellow like in the photo.
Is that a resistor to make the car think the airbag is still in place? If so size please, i was going to pull my dash bulb out!?
Its a 2.7ohm resistor, I just went into Maplins and asked for that size resistor and he tested it in front of me. Cost me 17p
Then do this to reset the airbag http://www.sxoc.com/vbb/showpost.php...2&postcount=34
Did it work? You could re-set the air bad light from the door thingy?
lol, wikid, il rob one from uni tomorrow! Cheers bud
Another update....
First off made a little video
Next up was the trip to the MOT station and I'm afraid to say the car failed , both the rear number plate lights had packed up and worse than that, a certain bolt has gone missing from the rear shock , bloody lucky it didn't pop off while I've been driving it.
So I then headed to Nissan and ordered the bolt aswell as a new oil filter and 2 rear number plate bulbs.
Once I got home I took the rear bumper off to get these lights changed.
I then removed the lights from the back of the bumper
The screws that hold the lights in are crap, I've never seen a screw head round off so quickly lol. so out came the dremel to cut them off and I was left with this.
Good news for the day was that there's no rust on the rear panel, happy days
Bumper back on and all working again
Whilst I had the bumper off I also took the boot lock out and and stripped it down and cleaned it all up, although I completely forgot to take any picture of it . But its all working now which is brilliant as its not worked the entire time I've had the car lol.
Last edited by Daz; 22-03-2010 at 12:51.
love that vid daz. where do you get the camera`s from? i wont.
still cant believe you been driving about with that bolt missing
Cheers nash
see this thread for the camera's
http://www.sxoc.com/vbb/showthread.php?t=448761
This morning I headed to Nissan to collect the replacement bolt for the shock
then fitted it and got the MOT passed, yahoo.
One thing I did find cool was that the MOT certificate states the car was too low to get on the brake rollers, gotta be happy with the lowness
might even go a bit lower
I also picked up a nice reclining bucket seat aswell which will be fitted as soon as I can source a seat rail for it.
Next up will hopefully be a new gear knob.
Wow you got away lucky with that bolt Glad its through its MOT and all sorted
daz... your a very bad man
that video has just made me wanna lose my ssqv tomorrow!
get a bride base mount for that seat and make it fit (wont be hard...)
its the only seat rail i found i could get low enough...
Your telling me, I was very shocked about that. feel very lucky.
I had an SSQV on mine when I bought it and loved it but the pidgeon is so much nicer, although strangely enough I crave a dump valve again but would probably rip it off after a few days lol.
Any idea how much the bride basemounts are? I'm 6ft 1 so want to have the seat nice and low, especially for when I do some trackdays with a lid on.
shit the bed you were lucky, if thats was mine it would have popped off and destroyed my 1/4 and wheel lol
Is it only really the Bride ones that are worth getting? can't be bothered with a 6 week wait.
It is a bit depressing that the seat rail is costing me more than the seat lol. Plus i'll want to get a harness soon aswell haha.
I'm so so glad it never popped off.
i have a number plate bulb out , i didnt relise it was a bumber off job , lets just say that wont be sorted in a hurry lol,
liking the seat, its funny how similar are mods/cars have been resently lol, damson, Rotas,lowered, offsets, steering wheel and the new surprise................. not crabs lol
k sport bucket seats
Last edited by Ricey; 24-03-2010 at 11:58.
ah nice one with the seats, I sat in a Ksport seat and struggled to get out, couldn't have it for the daily car, so the seat I've got will do nicely.
There are a few Damson's getting done recently.
I need to do something drastic to make mine stand out some more......mmmmm 1JZ should do it lol.