as above, i love threads like your were you show every step you have taken.
defo want to see what you do with hiding wiring and relay boxes thats what interests me most at the moment..
as above, i love threads like your were you show every step you have taken.
defo want to see what you do with hiding wiring and relay boxes thats what interests me most at the moment..
What did you do with regards to the Q45 Throttle body wiring? I have read the Spec 1 RB25 can reuse its TPS but the Spec 2 would involve mods to the loom?
Nice work BTW
Some good work and why you using the rb20 box and not the rb25??
Made a start on my Custom Relay Box locations.
The plan was to do a subtle Shaved and Tucked Bay without taking away from the cars intended purpose.
So the Relay boxes will stay in the Bay, but mounted in a more subtle location.
Started on the Offside Box.
Cut a hole in it's new home.
Added some Tabs to utilise the factory mounting points.
And finally welded it in place.
And test fitted the Relay Box.
Last edited by Will@666Custom; 06-05-2012 at 22:20.
Loving all the fab work on this. Truly inspirational! I wish I had the cash to let you co all out on my car too lol
Have you checked to see if the headlights foul your new relay box though? There is not much room behind my Sil80's headlights iirc (but I have weird long HID units).
Another fantastic build Will,
Great work again, I shall be keeping an eye on it.
That relay box is brilliant
I stitched a couple of seams together, then made a recess in them for my planned cable run.
Also got the Nearside Relay Box fabbed up and mounted.
updates will? looks like you have done loads from the pics of driftworks..
I made a start sorting the common rust area's under the Battery Tray.
Made a New top plate, and added a little hand swage to it for strength.
Made a crappy looking but functional bracket to mount the factory power plugs.
Had to fill a hole before it could be mounted on the chassis leg.
Mounted a couple of fixings.
Each Plug and Cable will need to be wired to the correct length before they are installed.