-
Flamethrower
Engine torque damper noise?
Well this morning i fitted Tegiwa engine damper and all went on okay
After about 2-3 hours of it being on i found that i had a noise coming from the n/s footwell. Obviously engine related as when the revs were increased the noise increased.
As the damper is bolted to the head, is it possible that the noise travels up the damper and is echoed as it were through the chassis??
-
Guest
That post sounds like its too stiff/hard (oooh err misses ),similar to the damper is a solid bar,I got 1 on both 13 and 14a and each can be rotated slighty on the rose joints quite freely,If your's is reluctant to turn its either set too hard or the joints are too stiff,if its new they might free off?,neither of mine were noticably fitted vibration wise on mine
-
Flamethrower
the rose joints are loose....i personally dont think its mounted right, but cant be mounted anywhere else on the head.
Ill take a pic tomorrow and post it up.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules