Anything that's not easy to remove again is going black or silver,as they are easier to touch in with a brush! just want some accents of blue!Originally Posted by Chriscooke
Bottom swing arms in blue as well
It probably won't end up looking any diferent than before knowing me
AS was!
You only need two tools in life - wd-40 and duct tape. If it doesn't move and should, use the wd-40. If it shouldn't move and does, use the duct tape.
And if you can't fix it with a hammer,you've got an electrical problem!
Here is mine. Not that flashy, but anyway...
Loving that bahis! nice to see so many cared for underbodies!
You only need two tools in life - wd-40 and duct tape. If it doesn't move and should, use the wd-40. If it shouldn't move and does, use the duct tape.
And if you can't fix it with a hammer,you've got an electrical problem!
Mine..
Last edited by NickS13; 19-06-2013 at 20:16.
I thought I had more pictures,
still looks good about 2 years on
Both above look great guys! Mine won't be far off yours I think Nick,a bit darker blue and s14 though
You only need two tools in life - wd-40 and duct tape. If it doesn't move and should, use the wd-40. If it shouldn't move and does, use the duct tape.
And if you can't fix it with a hammer,you've got an electrical problem!
I'm amazed how many spangly undersides there are around, it's very impressive!
I think it shows a certain level of care and consideration, it's like building good foundations before you build your house.
Mine, but as Paul knows - S13.
Mine really needs to be done but I'm worried what I'll find
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue
Very nice Barry! was it done with the bodywork?
And you know you need to do it chris
You only need two tools in life - wd-40 and duct tape. If it doesn't move and should, use the wd-40. If it shouldn't move and does, use the duct tape.
And if you can't fix it with a hammer,you've got an electrical problem!
Yes.Very nice Barry! was it done with the bodywork?
You'll find more if you do it later than you will if you do it now.Mine really needs to be done but I'm worried what I'll find
Have a look at my build thread
i seriously want to do mine now, ive got all the apex arms, im liking the white, must do this sometime soon!
Post 7,15,107,110Have a look at my build thread
Although in all honesty I had forgotten about that one
One question,i see you have lacquered a lot of parts,have any started peeling,cause i'm a bit worried with all the stone chips under the car that it'll look a peely mess in a year?
You only need two tools in life - wd-40 and duct tape. If it doesn't move and should, use the wd-40. If it shouldn't move and does, use the duct tape.
And if you can't fix it with a hammer,you've got an electrical problem!
the only thing that has peeled is the drive shafts.
Clean, not flashy... Wish i'd done flashy now
I prefer the term anal.
X
if your going to get anything zink coated its a good idea to get it powder coated or painted after, zink coating is not that good at protecting against rust on something thats being used frequently.
it scratches very easily and the moisture gets under the thin layer and causes it to rust. if you zink coat it and paint its a lot better and will last much much longer
Super clean .wowMine..
Posting Permissions
Reply With Quote
