Page 1 of 2 12 LastLast
Results 1 to 20 of 31

Thread: HFP E85 320LPH Intank Kit

  1. #1
    Flamespitter fuel performance's Avatar
    Join Date
    Oct 2013
    Location
    London
    Posts
    300
    Rides
    0

    HFP E85 320LPH Intank Kit

    This is our E85 320LPH Intank Kit.

    Info - http://www.fuelperformance.co.uk/ind...365_92_189_271

    LIFE TIME WARRANTY! & are specifically designed to be E85/ETHANOL compatible!

    £89.99

    sales@fuelperformance.co.uk

    DESIGN FEATURES:

    The FUEL PERFORMANCE 320LPH Intank Fuel Pump has a number of design advantages compared to a Walbro 255 pump, an Aeromotive Stealth, or the new Walbro F90000262 400LPH pump.

    1. FUEL PERFORMANCE HFP pumps are manufactured to our specifications to balance volume, pressure, and turbine impeller angle to prevent overheating of the fuel (a known issue with Aeromotive's 340LPH Pump, and Walbro's New F90000262 400LPH Pump).

    2. Except for a faint "wheen" during pump priming, HFP pumps are nearly silent. Walbro pumps are notorious for their loud vibrating "hum" during operation.

    3.FUEL PERFORMANCE backs every single pump with a Lifetime Warranty. Walbro requires that you pay a $40 "warranty fee" when you send the pump in which often results in them telling you it was installer error, not pump failure.

    4.FUEL PERFORMANCE pumps are flow verified by RC Engineering and are guaranteed to flow higher than any 255LPH/ 265LPH/ 300LPH pump on the market (flowsheets on our website).

    5.FUEL PERFROMANCE 320LPH pumps can also be used as direct replacement pumps, without overpowering the factory fuel pressure regulator. This is not the case with 340LPH and 400LPH intank fuel pumps. The advantage of modern return-style fuel systems is that they only use as much fuel as the engine requires. Any unused fuel is automatically sent back to the tank via the return line. Using a 300LPH pump instead of an OEM replacement will simply provide room to grow if any modifications are planned for the future.


    SPECIFICATIONS:

    Noise Level: Nearly Silent

    Condition: 100% BRAND NEW
    Design: Intank
    Flow: 320LPH+
    Minimum Voltage: 12V
    Operating Pressure: 15-90 PSI - final fuel pressure set by regulator

    Warranty: LIFETIME

    4 3/4" Long from inlet tip to outlet tip
    3 1/8" Long for the metal case
    1 5/8" Wide for the metal case
    Inlet width: 7/8"
    Outlet width: 5/16"

    Last edited by fuel performance; 26-09-2014 at 12:04.

  2. #2
    Flamespitter fuel performance's Avatar
    Join Date
    Oct 2013
    Location
    London
    Posts
    300
    Rides
    0
    £79 each Including UK Delivery !

    Lifetime Warranty!
    Last edited by fuel performance; 27-04-2014 at 10:42.

  3. #3
    Flamespitter fuel performance's Avatar
    Join Date
    Oct 2013
    Location
    London
    Posts
    300
    Rides
    0
    Some nice results with these in the UK over the past few weeks with the EVO Guys.
    500-600HP on these.

    Hot Wire Kit makes a noticeable improvement as well.

    Also a GTR R33 overseas - 389KW on all 4 wheels on one of these 320LPH (no hot wire Kit)


    Bump!
    Last edited by fuel performance; 05-05-2014 at 10:26.

  4. #4
    Flamespitter fuel performance's Avatar
    Join Date
    Oct 2013
    Location
    London
    Posts
    300
    Rides
    0
    keitht - EVO 5 , Ireland


    "Hi Duane,

    I got this on Friday and got it fitted no problem,

    I went mapping yesterday and made 533/508 then the rollers had a problem so didn't get to finish, I'm hoping for 550bhp next week.

    The pump ran perfect and had no issue with fuel flow.

    I will send on some pictures of my car tomorrow.

    Thanks for your help, service was second to none and will recommend to all my friends.

    Keith:smthumbup"


    "Hello,

    See attached photos of my car, currently running 533bhp at 2 bar boost on a single HFP intank 320LPH pump.

    Thanks
    Keith"






    Thanks Keith!

  5. #5
    Flamespitter fuel performance's Avatar
    Join Date
    Oct 2013
    Location
    London
    Posts
    300
    Rides
    0
    EVO 7
    Evo 8 motor.
    Knife edge crank
    Manley turbo tuff I beam rods
    Manley pistons
    ARP Head / main studs
    ACL race bearings
    GT35R turbo + twinscroll manifold
    1000cc precision injectors
    Apexi power FC
    Exedy clutch
    Spark tech coils (new)
    FUEL PERFORMANCE Highflow 320LPH Fuel Pump Kit

    BC Racing coilovers
    Work kai 18" wheels

    340kw, 518nm @ 1.2 bar - Wheel Power

    -Soon to be mapped with E85-



  6. #6
    Flamespitter fuel performance's Avatar
    Join Date
    Oct 2013
    Location
    London
    Posts
    300
    Rides
    0
    Steeve Robert

    Specs:
    2006 Mitsubishi EVO 9
    Colour: black, black interior
    Extras:
    19" Enkei wheels
    GTX3076 turbo
    AMS header
    720cc PTE injectors
    FUEL PERFORMANCE 320LPH EVO Intank Fuel Pump Kit
    AEM water meth kit
    Turbosmart dumpvalve and wastegate
    HKS Silent power full exhaust
    Greddy turbo-timer
    AEM boost-gauge,air/fuel
    Turbosmart dual stage boost controller



  7. #7
    Flamespitter fuel performance's Avatar
    Join Date
    Oct 2013
    Location
    London
    Posts
    300
    Rides
    0


    Mitsubishi Evolution Viii 2004.

    Motor, transfer case and gearbox was built by No Sweat racing.
    E50 and pump map was tuned by Pyro Performance
    471kw @ 1.7 bar E50 694nm
    300kw @1.1 bar Pump
    Rev limit 8500rpm max

    Specs:

    GTX3582 0.63 housing
    Tomei Procams 280
    Haltech Platinum Pro 2000 ecu
    CP Pistons
    Manley Turbo Tuff Rods
    No Sweat racing cylinder head
    JM Fabrication intake manifold
    DSM 4G64 Crank
    AMS fuel rail
    Airomotive FPR
    Ingals engine damper
    Sparktech coils
    Tial W/G
    No Sweat Racing FMIC
    FUEL PERFORMANCE HFP E85 320LPH EVO Intank Kit
    044 Bosch inline
    Ralliart radiator cap
    Tomei oil cap
    Rexspeed CF air diffuser
    Rexspeed CF coilcover and cam cover
    ACL bearings (Rods and Mains)
    ARP head bolts
    No Sweat Racing Sump (baffled)
    Manley Upgrade Rod Bolts
    Cosworth Head Gasket
    Fluidyne Damper
    BC Springs and retainers
    Supertech 1mm oversize Valves
    Supertech bronze valve guides
    Cambelt - Gates Race belt
    ARP Main Bolts
    GSC Zero Tick Lifters
    ACL Thrust Washer
    950 cc Injector Dynamics
    Mishimoto Thermostat
    Duel maps E50 & pump via switch
    Boost control via ECU

    Carbonetics Twin plate Carbon clutch
    Cryo treat gearbox- gears & shafts
    Transfer Case strengthen to Shepard stage 2, bolts upgraded to 10mm
    Quaife diff for TC


    D2 brakes 356mm 8 pot
    Braided lines
    BC coilovers
    Blue stuff rear pads
    Whiteline rear and front swaybars
    Whiteline rear strut brace
    Ultralight 18’ wheels
    Works wheels nuts

    Rexspeed CF Front splitter
    Rexspeed CF side sills
    Rexspeed CF rear splitters
    Rexspeed CF hood vent
    Rexspeed CF Aerial
    Evo 9 rear bumper
    Evo 9 look front bumper.

    Tomei gear knob
    JVC player
    RF speakers
    Defi HD gauge, fuel pressure, oil temp, oil pressure, revs display, tacho.
    Defi Boost gauge linked to ZD
    1st race racing harness

    This was still stock motor with Bolt On's



    Ads9 EVO IX, Surrey - HFP-320LPH


  8. #8
    Guest Dave270r's Avatar
    Join Date
    Apr 2006
    Location
    Sudbury
    Posts
    5,490
    Rides
    0
    Go on then, how do I buy one?

  9. #9
    Flamespitter fuel performance's Avatar
    Join Date
    Oct 2013
    Location
    London
    Posts
    300
    Rides
    0
    Quote Originally Posted by Dave270r View Post
    Go on then, how do I buy one?
    Hi

    You can purchase via the website, but the easiest for you would be just to send a Paypal to - sales@fuelperformance.co.uk £79

    (Make a note which vehicle it is for, so I can make sure you get the correct Strainer/Install Kit)


    Thanks

  10. #10
    Guest Dave270r's Avatar
    Join Date
    Apr 2006
    Location
    Sudbury
    Posts
    5,490
    Rides
    0
    Payment sent

  11. #11
    Flamespitter fuel performance's Avatar
    Join Date
    Oct 2013
    Location
    London
    Posts
    300
    Rides
    0
    Thanks! Will Ship off first thing in the AM!

  12. #12
    Flamespitter fuel performance's Avatar
    Join Date
    Oct 2013
    Location
    London
    Posts
    300
    Rides
    0
    Lots of these have gone into the VXR Astra/Corsa / OPEL Astra/Corsa OPC of late.



  13. #13
    Flamespitter fuel performance's Avatar
    Join Date
    Oct 2013
    Location
    London
    Posts
    300
    Rides
    0
    Emails Replied!
    Orders Shipped!


  14. #14
    Flamespitter fuel performance's Avatar
    Join Date
    Oct 2013
    Location
    London
    Posts
    300
    Rides
    0
    All Shipped!

  15. #15
    Flamespitter fuel performance's Avatar
    Join Date
    Oct 2013
    Location
    London
    Posts
    300
    Rides
    0
    Plenty 240SX/200SX 320LPH Kits Shipped out Worldwide.

    Bump!

    sales@fuelperformance.co.uk

  16. #16
    Flamespitter fuel performance's Avatar
    Join Date
    Oct 2013
    Location
    London
    Posts
    300
    Rides
    0
    Shipped! Many happy 200SX Owners Worldwide

  17. #17
    Guest
    Join Date
    Nov 2006
    Location
    Bucks
    Posts
    985
    Rides
    0
    Just about to order one of these!
    Also,how much is a hotwire kit now for an S14 Silvia? And have u still got the NGK 7 plugs for sale?

  18. #18
    Flamespitter fuel performance's Avatar
    Join Date
    Oct 2013
    Location
    London
    Posts
    300
    Rides
    0
    Quote Originally Posted by integra View Post
    Just about to order one of these!
    Also,how much is a hotwire kit now for an S14 Silvia? And have u still got the NGK 7 plugs for sale?
    Hi

    Hot Wire Kit - 28.99

    Plugs all gone (they were just a spare bunch of my own)

    Paypal - sales@fuelperformance.co.uk


    Thanks

  19. #19
    Flamespitter fuel performance's Avatar
    Join Date
    Oct 2013
    Location
    London
    Posts
    300
    Rides
    0
    integra - Payment Received.
    Shipping out in the next 10min.

    Thanks.

  20. #20
    Guest
    Join Date
    Nov 2006
    Location
    Bucks
    Posts
    985
    Rides
    0
    Awesome, cheers! My Walbro packed up instantly last night. :-( Is this a known thing to stop with no warning? And would it then cause the fuse to blow??

    Have you got an idiots guide to fitting a Hotwire kit at all?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •