Zeitronix Zt-2 & LCD Display Package

[fuel performance]

£299.99 Inclu UK 1st Class Delivery

See - http://www.fuelperformance.co.uk/ind...y&path=343_373

sales@fuelperformance.co.uk




The Award Winning Zt-2 Model 2010 Wideband Datalogging System

http://www.zeitronix.com/Products/zt2/zt2.shtml

The Zeitronix Wideband Air/Fuel ratio meter and datalogging system is a high quality, stand-alone system for use with carbureted and electronic fuel injection engines. Zt-2 Wideband Kits provide the best bang for your buck delivering unmatched quality, features and capabilities for very reasonable prices. Our system provides the accuracy of a Dyno Air/Fuel reading right in your vehicle as well as multiple engine parameters. Our base system is very easy to install and retails at $279 USD which includes the wideband oxygen sensor, controller, wiring hardware, and the software required to start datalogging and tuning immediately.

Supports Air/Fuel ratio as AFR/Lambda, plus RPM, Vacuum, Boost, Exhaust Gas Temperature, Throttle Position, 0-5 volt sensors, Air/Fluid temperature sensors and Oil/Fuel pressure sensors. Tune fuel injected and carbureted engines.

Very simple installation - connect two wires to +12V and ground and place the O2 sensor in the exhaust stream and you are ready to read AFR! A simple LED indicator displays off, warm-up and running modes. Side LED Image

Cut your tuning time in half!

The Zt-2 controller:

The Zt-2 is an incredibly powerfull tuning aid. Not only is it a wideband controller but it can accept an array of inputs, and while connected to a lap top (via a serial cable) it can data log all of the values inputted. It is ideal for road or dyno tuning, logging 1/4m runs and track sessions, etc.

Items included with each Zt-2 Kit:
•Zt-2 Wideband Controller
•Bosch 5 wire Wideband Oxygen Sensor
•Oxygen Sensor Harness (10 feet length)
•Signal Harness
•Serial datalogging cable with RJ-12 to DB-9 converting plug
•Zeitronix Data Logger software
•Instructions
•2 pin connector for the EGT input

Optional items for Zt-2 Wideband Kits
•Wideband LCD display, ZR-1, ZR-2 gauges, Hacker/Tweaker Display, DashDAQ Touch Screen Display
•Boost/Vacuum (MAP) Sensor (50 psi/3.5 bar or 75 psi/5.0 bar MAP sensors)
•EGT Probe
•Fuel Pressure Sensor (150 psi / 10 bar Gauge Pressure sensor)
•Oil Pressure Sensor (150 psi / 10 bar Gauge Pressure sensor)
•Air Intake Temperature Sensor
•Coolant Temperature Sensor
•Oil Temperature Sensor
•Transmission Temperature Sensor
•ZAVT-1, Zeitronix Audio-Visual Warning and Trigger Box for failsafe operation

Inputs:

EGT - An optional EGT probe can be connected, no additional interface or loom required.
Boost - With the supplied software the Zt-2 can be connected to an optional manifold sensor to allow the gauge to show vaccuum and boost pressure.
RPM - The Zt-2 will read any standard tacho signal or can be connected to an HT coil's negative connection.
Throttle position - The Zt-2 can be calibrated to read throttle position, as long as the engine has a throttle position sensor installed.
User 1 - A user configurable spare analogue input that can be connected to (and calibrated with) other sensors, an existing MAP sensor, etc.
User 2 - A 2nd user configurable spare analogue input that can be connected to (and calibrated with) other sensors, an existing MAP sensor, etc. Additional temperature sensing probes for Fluid or Air temperature are to be connected to this input. When a Zeitronix temperature probe is used on this input, the result can be displayed via the ZR-2 gauge or LCD display.

Outputs:

Linear wideband output - AFR=Vx2+9.6
Non-linear wideband output
Serial data output - for ZR-2, LCD, etc.
Serial port - to connect to PC/lap top for configuration and real-time data logging and diaplay.
Simulated narrow band output - replacing factory probe or to feed an ECU.
Warning output

LCD Display:

The remote LCD display gives you a stealth look and important data in high contrast digital format. The aluminum enclosure dimensions are 4.7" x 2" x 0.9" , slightly larger than the LCD display itself. The LCD fonts are bright white on a black background. High contrast LCD digits are visible even in a direct sunlight. A push of a button located on the right side of the LCD shows peak and hold maximum AFR, Lambda, EGT and Boost values. The LCD display communicates with the Zt-2 digitally through a serial interface. This allows for a clean display installation in the car, since all heavy wire connections are going to the Zt-2. The display serial cable is thin, black and easily blends with the dash. The new overlay is made from hard coated, scratch resistant material.

ZDL Datalogging Software


The Zt-2 communicates with a PC Laptop via the serial port (USB to Serial adapters may be used). The ZDL logging software records up to 9 hours of data per log file. May screen layout options are available including Dashboard, overlapped or non-overlapping plots with markers and text. The Zeitronix Data Logger software uses a black background for low profile easy to read night tuning. Logging start, stop and pause are accessible from easy keyboard shortcuts. Excel and text file data export available.

Win98/NT/2000/ME/XP/Vista/Windows 7 compatible.
you do not need P4, P3 or even P2 laptop. Leave your new laptop at home and dedicate the old one to car tuning. We give you well optimized software that will run quickly on any hardware capable of running Win95 and up.

Zeitronix LCD Display:

http://www.zeitronix.com/Products/LCD/LCD.shtml

Fully digital, smallest wideband O2 controller and datalogging system in the world!
Zt-2 is about the size of 1" thick business card. Extremely compact design for installation where space is a premium.

Zt-2 SpecsZt-2 Controller
•0.1 AFR accuracy
•Operating voltage 10V to 18V
•Switching power supply for oxygen sensor heater
•Precise sensor temperature control
•Reverse polarity protection
•Integrated self-resetting fuse
•Positive lock connectors
•Protected inputs and outputs
•Flexible Plug and Play Sensor Harness with a small, easy to route through the fire wall, connector
•Wideband Oxygen Sensor included
•Easy to install plug and play kit
•Adjustable Narrowband Switching Point
•Warning Alarms and TriggersMade in USA

Inputs/Outputs:
•Bosch Wideband O2 sensor Input
•Linear Wideband Output AFR = Volts * 2 + 9.6
•Serial data output to the Zeitronix LCD, ZR-1 AFR, and ZR-2 Multi-Gauge Displays
•Serial data output for real time datalogging (PC laptop required)
•RPM Input (tachometer, primary side ignition coil, crank, cam sensor).
The RPM input works in any car and any ignition system. No additional adapters needed!Wideband Oxygen Sensor
•Simulated and adjustable Narrowband Output to feed a stock ECU
•Throttle Position Sensor Input
•Boost (MAP) Sensor Input:
- 50 PSI (3.5 Bar) MAP Sensor, or 75 PSI (5.0 Bar) MAP sensor or
150 PSI (10 Bar) MAP sensor
•Exhaust Gas Temperature (EGT) probe Input
•User1 Input:
- 0-5 volt analog input. Voltage data is viewable on all models of the LCD display.
Software support for the display of Zeitronix pressure sensors.
- Customized data conversions can be entered to match 0-5 volt sensor specifications.
All converted User1 data values are displayed only in the software.
•User2 Input:
- 0-5 volt analog input OR configurable to be used with Fuel/Oil/Boost pressure sensors and Air/Water/Oil/Transmission temperature sensors.
- Data is displayed on the 2010 Model LCD and ZR-2 Multi-gauge as a pressure or temperature.
- Zeitronix Data Logger software will display and log data according to sensor type.
- Customized data conversions can be entered to match 0-5 volt sensor specifications.
Customized data conversion values are displayed in the Zeitronix Data Logger software only.
•Warning Output for use with ZAVT-1 warning/trigger box
•5V output for sensors

Input / Output Range
Lambda 1.43 to 0.64 Wideband
AFR 21.0 to 9.5 Wideband
Vacuum 25.5 inHg (650 mmHg)
50 PSI (3.5 Bar) MAP Sensor Vacuum to 35.3 PSI (2.4 Bar) pressure
75 PSI (5 Bar) MAP Sensor Vacuum to 60 PSI (4.1 Bar) pressure
150 PSI (10 Bar) Pressure Sensor 0 to150 PSI Gauge (0 to 10 Bar)
EGT 392 F - 2200 F or 200 C - 1200 C
Analog Wideband Output 0 - 5V
Narrowband Output 0 - 1V (configurable rich/lean switching point)
Throttle Position 0 -100%
RPM 0 - 18,000
User Input 0 - 5V
User2 Input
(Zt-2 Model 2010 -- sold 10/15/2009 and later) Configurable: 50/75/150 PSI Sensors, Air/Fluid Temperature Sensors
(additional sensor display support through ZDL software)
Warnings Output 0-5V, 4mA output (see ZAVT-1 for triggering additional hardware)

[fuel performance]

Emails Replied.

All Sold!

-More will be in on Wednesday morning-

[fuel performance]

A personal favourite of mine.

I have used these in almost every car/build of mine & I have one sitting here for my Silvia.

Here is the GTR R33

[fuel performance]

Last One SXOC Bargain - £269.99 Inclu UK 1st Class Delivery!
More Soon.