Hi I thought I would start a project thread on my s13. I bought the car a couple of months ago as a project. My freind who is also on here bought a 180 and I just fell in love with the cars, so I sold my nissan pulsar and bought a project UK 200sx to do up over winter, I was determined that I was going to put an rb in the car but after reading up on it, and my freind persuading me otherwise I decided to stick with the little ca, it has plenty of potential for me I am aiming for a very modest 350bhp I am on a tight budget for this as we are looking at getting a house the welding is being done by a lad I work with so very lucky there I am a mechanic so that helps with costs a lot,the car starts and drives and here is a picture of how I got it.
Unsurprisingly the boot lid needed welding and had been very badly repaired before I had hoped to find a replacement but struggled so we have had to repair the original one
We then had to remove the fuel tank so we could sort out a really bad hole we had to source a done right panel to do this and we made all off the inner panel and then added the doner panel afterwards
Other than that the car is really very solid I plan to complete strip underneath of the car and paint and reseal I have stripped the fuel tank ready for paint and once the welding is done I can make a sart underneath
Anyway thanks for looking and I will keep updating as I go