Just giving the cars a bit of a refresh in places that was heavyily stone chipped ect.
Got 4 questions currently.
1. 2 of the body kits have a 2 tone effect the top halfs are body coloured but then the lips at the bottom are dark grey/black.
so ive primered them all over and filled in all the stone chips or sanded them down and ive sprayed the body coloured base coat on but im not sure how to do the black.
Do I just masking tape the body colour basecoat(no clear coat) off and spray the black but doing that is going to leave a paint line once the masking tape is pulled off between the 2 basecoat colours
or do I clear coat it now then sand off the lower part and e It off and spray the black then clear coat then sand the line down?
Q2. how many colour base coats should i do?
Q3. Can the base coat be wet sanded or not?
Q4.why does the basecoat show up marks that wasnt visable when it was just in primer? Its not a run its like a mark in the surface?