Exhaust manifold help

[boustie]

Started building up a black top engine (straight cam) to go in my s15

I bought an exhaust manifold from gduk but it fouls on the metal breather pipe that sits in the block and goes up to the metal breather tank

Any help greatly appreciated as always





Sent from my HUAWEI GRA-L09 using Tapatalk

[Chriscooke]

that looks like an s14 manifold to me. The 14a and 15 dont have the extension at the rear.

[Loopy_drifter]

14A looks like this..

[boustie]

Not sure best way forward, I take it the pipe is pressed into the block.
I'm guessing I'd have to cut the pipe to make the Mani fit ?

Sent from my HUAWEI GRA-L09 using Tapatalk

[tricky890]

I have a spare 14a manifold for sale if your interested , straight bolt on and no messing about !


Sent from my iPhone using Tapatalk

[boustie]

Sorry should have mentioned I got one thanks tho.

Sent from my HUAWEI GRA-L09 using Tapatalk

[Drifter]

I've never seen that breather setup, it normally goes from the block to the cam cover. That keeps the metal pipe tight to the head and out of the way

My S14a had the same manifold, but it just had the EGR port plugged off so there is a mix of them out there