-
Guest
11" wide alloys on the rear and 9.5 on front with 5 stud and 50mm fender,will it fit?
Hi all, I've been on wheel fitting sites but I'm a bit lost on if this will fit my s13 on s14 5 stud hubs. So what I'm after is to know if I can fit 11" alloys on the rear of the car and if not can the arches be rolled before painting the car to install them them. Don't know uf makes a difference but I'm running hsd mono pros. Thank you in advance for help :-) also this all assuming that 18's will go on ?
Last edited by dotzero; 30-05-2016 at 09:25.
-
Dorset & Hants Rep
11j wheels will fit but the main thing is the offset have you checked willtheyfit.com ?
You can easily roll the lip on the s13 rear arch but from past experience i have found they dont like to be flared as such or at least not much.
-
Guest
Is the offset the et number. Sorry very clueless on the whole thing
-
Guest
18x10 et35 245/40 . rolled and flared and tyre still rubbed arch over bumps/fast cornering..
-
South West Rep
-
Guest
ok thanks for the pics, all wheels will be 18 inch diameter and on the front it will be 9.5 inch wide et 10 and the rear I would like to be 11 inch wide and they are et8. I am now fitting +25mm fenders on the front and +50mm fenders on rear. do you think this will be enough to compensate or on another thought are the 11" on the rear going to cause me driving issues becsuse of the difference in tyres?
Last edited by dotzero; 29-05-2016 at 06:38.
-
Guest
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules