-
Guest
Help coilover problem
Hi guys need help asap.
I have s13 Drift works cs2 coilovers, I need to remove the pillow ball joint top mount
But don't seem to be able to.
What am I doing wrong?
Cheers guys
-
Guest
what part are you are struggling with?
-
Guest
Undoing the main bolt on top of the coilovers do i can take the pillow ball joint off and just have the top mount thread
-
Guest
Well to answer what are you doing wrong we need to know how your doing it really
-
Dorset & Hants Rep
Take the preload off the spring by loosening the top collar/s and use a impact gun
-
Guest
^this.
If you dont have an impact gun it can be a nightmare. Some manufacturers have an Allen key recess inside the top nut which you can use to hold the stanchion but you have to use a vortex style socket etc. Dont think CS2s have that lol. Good luck with it fella
I had to do this on my cusco coilovers and sadly ended up doing what the last idiot had to do (saw the marks) and grip the stanchion high up with water pump pliers whilst a mate used a breaker bar (I did wrap the stanchion with rubber/rag to try and protect it from more damage and do it high so it's not near where the stroke/seal is.)
Last edited by shikari chaos; 27-06-2016 at 23:22.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules