Manual conversion

[discopotato94]

Hi guys
Wanting to convert my .CA s13 to manual I'm want to keep the engine and go to 250bhp maybe 300, will the standard ca 5 speed handle this or will it shit it self if so what box shall I put in ?

Also any other info on bits to buy for it would be great
Cheers

[w4rn3r1]

Following

Sent from my SM-G955F using Tapatalk

[Jonny Wilkinson]

A healthy CA box will live with 300 all day. Refurbish or upgrade the brakes so it stops as well as it goes and don't lower it too much or it will suffer mystery electrical maladies.

Sent from my XT1032 using Tapatalk

[Jonny Wilkinson]

And replace all the baggy saggy bushes

Sent from my XT1032 using Tapatalk

[discopotato94]

Cheers for that pal ����

[ANDY black s13]

A good quality GL4 gear oil wont hurt, check Opie the oil man on here for good advise on all oil's/fluids to use in a 200
it must be a GL4,not GL4/5 or GL5 due to bronze syncro rings

[jay1017]

A healthy CA box will live with 300 all day. Refurbish or upgrade the brakes so it stops as well as it goes and don't lower it too much or it will suffer mystery electrical maladies.

Sent from my XT1032 using Tapatalk

OP make sure you tuck your wiring loom into the fenders if you plan on going low, otherwise you'll rub through it. Lots of guides online

[Jonny Wilkinson]

OP make sure you tuck your wiring loom into the fenders if you plan on going low, otherwise you'll rub through it. Lots of guides online

Yeah. Sorry. Might have been more useful if I'd said why. Was in a funny mood.

Sent from my XT1032 using Tapatalk