-
Guest
Crank angle sensor
My crank sensor catches the cam bolt heads when i tighten the bolts? loosen them and hay presto quiet again
Anybody know why??
Thanks
-
Guest
Are there marks on the back of the sensor?
Usually knocks from CAS means it's not correctly lined up with the cam. There are 2 dowels on bolts between the sprockets that align the upper belt cover to the head. If either is missing it's not possible to fit the CAS correctly. The tolerance of CAS to cam alignment is the fit of the CAS in the cam nose.
-
Guest
Yes there is scrape marks on the back
Thanks
-
Guest
Take the top cover off - are you missing the dowels?
Are all the bolts in it, in the right order?
-
Guest
Ok i will take off the cover to check
Thanks
-
Guest
Nightmare getting it off, as its front wheel drive but its off. Dowels are in and all the allen bolts.
Also tried another cas before i posted and that was same.
Weird
-
Guest
its all good now thanks guy's the cover wasn't on the dowels properly.
Thanks for advise people.
-
Guest
Cool - easy to do, and thankfully easy to fix.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules