i have a 14A elbow and downpipe as a result it hangs pretty low.
someone on FB mentioned the 14 downpipe is shorter, is it likely that it will bring my exhaust slightly closer to the body helping with clearance?
i have a 14A elbow and downpipe as a result it hangs pretty low.
someone on FB mentioned the 14 downpipe is shorter, is it likely that it will bring my exhaust slightly closer to the body helping with clearance?
S14A elbow and S14A downpipe is the right combination. Same for S14 elbow and S14 downpipe. Should fit on a S15 no issues, but u need the right combinations.
Is it possible you have an S14A elbow with an S14 downpipe?
The S14a has a short elbow and a long downpipe (to fit the extra cat).
S14 is the other way around.
I thought they all worked out the same size if you kept matching sets
you cant mix and match
so just to clarify if i use my current 14a elbow and a 14 downpipe it will sit closer to the body, ideally i need it closer by a few inches if poss ...
short-short will leave you short.
long-short will fit.
short-long will fit.
Not sure about long-long. Either it just won't fit or it will leave you with a low exhaust.
Could it be that you have the long bit from a 14 and the long bit from a 14a ?
If you have a few inches of space between your downpipe and the chassis it sounds like something is wrong. An s14 downpipe or elbow may work if yours is that far off.
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue
what manifold do you have? some china spec ones put the turbo in a different spot. mixing and matching china stuff is a pain, as there is no real standard to where they 'should' put the 3 bolt flange.
what engine mounts do you have? Ca ones are a different height to Sr ones.
This is on my Spec S S15 everything came from my old 14a which fitted fine so nothing wrong with components just the body is different
I didn’t think you could mix and match due to the different angle of the flanges
Are S15 engine mounts different to S14 mounts ? Could it be that the SR sits lower in 15 than a 14 ?
S15 exhaust (cat back) is different length.