-
Guest
Skyline R33 series 2 RB25det 70 kms Block stock bores crank sump Cometic MLS 1.7mm
SOLD deposit taken pending collection/balance,,,,,,All from a 70 kilometers import R33 lots of pics in the ebay links,Block on standard bore sizes, honing marks still visable,
it has the crank girdle/main caps +bolts,piston oil squirters,2 knock sensors,both engine mounts/brackets,dipstick tube
and other odds and sods, block and all parts have been oil protected and stored in spare bedroom
£200 ono ebay linky https://www.ebay.co.uk/itm/282874049...84.m1555.l2649 collect from Erith Kent DA8
Crankshaft from same engine all stock standard sizes,woodruft keyways +oil pump drive are very good
was stripped to go forged rods pistons and No 2 big end was found to be picking up the bearing,
it mic's on the low side of tolerance and can feel its slightly scored when run a fingernail over it,
was going to get it cleaned up possibly metal sprayed to stay on stock sizes
£80 ono ebay linky https://www.ebay.co.uk/itm/282874065...84.m1555.l2649
Collect from Erith Kent DA8
Sump pan, clean no dents or rust £80 ono + 7.95 postage UK mainland,other areas message me
ebay linky https://www.ebay.co.uk/itm/282878905...84.m1555.l2649
Cometic MLS head gasket .1.7mm stock bore size used less than 1k on low boost,
was installed with a spray on layer to protect the Original sealing coating
£80 ono message me regards postage as will need making up something to protect it ebay linky https://www.ebay.co.uk/itm/282878937...84.m1555.l2649
will do deal on the lot or take offers on individual items,
prices are bit high for wiggle room to recoup costs after change of plans and deter ebay messers
prefer collect from erith kent da8 on block and crank
Last edited by ANDY black s13; 23-03-2018 at 19:08.
Reason: depo taken on all items
-
Guest
back to the top,make me cash offers on the lot
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules