Just picked a set of z32 brakes for my 13 is there anything special I need to know before I go to fit them. Do u need a special brake pipe it looks different
Just picked a set of z32 brakes for my 13 is there anything special I need to know before I go to fit them. Do u need a special brake pipe it looks different
Contact Slide Motorsport, I had to buy new brake flexi’s and they had the right HEL braided hoses I needed and got them next day, cost me £90 deliveredOriginally Posted by craigjj828
Sent from my iPhone using Tapatalk
As above, you'll need hoses.
What discs have you got?
I bought new discs for mine as the ones I was given were wrong, MTEC do the Z32 ones that are a perfect fit
H: 64mm
D: 295mm
Th: 18mm
Sent from my iPhone using Tapatalk
Well... they’re the rear sizes anyway
Sent from my iPhone using Tapatalk
Go direct to hel and get custom ones made, mine came next day and set of 4 were about £70
Sent from my iPhone using Tapatalk
Call me cheap. I didn't use new hoses or unions.
Filed the banjo seating face flat and square, "draw file" to remove file marks. Any radial scratches that go from hole to air will be a brake fluid leak.
Drilled the ends off the bolts so they don't bottom out on the nipple. Can't remember how much, ~3mm I think, cone shape made by drill in end of bolt reduced the amount a little from measured amount. The alternative would be a lot of washers (but they cost money and petrol for a trip to the motor factors, did I say I was cheap?).
Posting Permissions
Reply With Quote
