I have a feeling mine are knackered. 18 years old and never been changed.
Question is where can I get a set for decent money? Which ones are good? Or should I polybush?
Sent from my SM-G920F using Tapatalk
I have a feeling mine are knackered. 18 years old and never been changed.
Question is where can I get a set for decent money? Which ones are good? Or should I polybush?
Sent from my SM-G920F using Tapatalk
For a road car just polybush them and fit new Moog ball joints. Clean them up first with a wire brush and give them a lick of paint with something half decent, even hammerite.
Bushes wise I used energy suspension for my rear arm bushes and they fit perfectly and are great quality. Better than the driftworks tat. I ordered from the states, they also sell MOOG ball joints on the same site.
http://www.energysuspensionparts.com...san_200sx_1997
If you’re doing new ball joints and inner bushes then the nismo arms may be worth looking in to. No idea on current prices though
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue
Good shout with rockauto. I have ordered from them before and they deliver.
Don't happen to have the part numbers for the ball joints do you? Are they K9820?
I see they also sell the energy bushes.
It's tricky know if they are the correct parts as they have 1998 200sx 2.0 L4 whatever that means and 240sx 2.4 L4 and under both listings when I look at the complete control arm it looks nothing like it should :/
Sent from my SM-G920F using Tapatalk
The nismo arms are £250 plus post and import so not cheap
1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue
K9820 moog joints, garage d stock them at £40 each last time i checked works out about the same coming from usa plus the risk of taxes, but if you buy bushes too its probably worth it. i used energy suspension bushes all round and bought from frsport
Energy Suspension 7.3108G for front arms