I finally got around to making up new looms for the indicators, now I have two on the side of the front bumper and two in the fog light position. So now it's happy and flashing at a sensible speed and I have my sidelights back. I think that was my last big hurdle for an mot. No pics, because they're just wires.
Nissan found an oem windscreen moulding hiding away in a warehouse for me. It turned out to be a super easy job. There was a LOT of sh*t behind the old one, so it had a good clean and a few hours to dry in the sun. The new one is a massive improvement.
I made up new mounting points for the front bumper using rivnuts. I came up with a cunning plan for the sides so I can remove them with bare hands, bolts with lots of nuts covered in heatshrink. It works surprisingly well. The picture I have is of the Mk1, the 2nd version is a bit longer and uses rivnuts instead of wingnuts. Now the bumper comes off with one allen key in less than a minute.
Before
PSX_20180727_100452.jpg
During
PSX_20180727_100758.jpg
After
PSX_20180727_100831.jpg
Bumper bolts
PSX_20180727_101005.jpg